Megaflow Trough Valve
- Side or Bottom mount Capability
- Compact robust construction
- Flow rates up to 90 gallons per minute
- Available in 3/4", 1" , and 1-1/4"
- Lock off with cord lock
- 5 – 150 psi pressure rating
- Constructed from corrosion resistant materials
- Positive On/Off operation without Water
Hammer
- Service Kits available
- Easily disconnects with a 1/4 turn to remove
the valve and clean the internal screen filter.
Click
here to view the “Technical Info Sheets”
|
 |
Rojo Float Valve
- Built in Check Valve
- Fully adjustable float angle
- Side, Bottom, or Top Mountable
- Higher Flow Option Available
- Non Corrosive Material Construction
- Flow stops when unscrewed for servicing
Internal filter
- 0 – 150 psi water pressure range
- Available in 1/2" and 3/4"
Click
here to view the “Technical Info Sheets”
|
 |
Topaz Trough Valve
- High Flow
- Side, Bottom, or Top Mounting
- Made from corrosion resistant materials
- Shuts down slowly to minimize water hammer
- Water flow up to 90 Gallons per minute !
- 5 - 100 psi water pressure rating
- Adjust float with wing bolt + adjustable
extension arm
- Built on Lock off switch
- Connection for anti-freeze device
- Available in 3/4", 1", and 1-1/4"
Click
here to view the “Technical Info Sheets"
|
 |
Jobe
FrostPro
The Frost Pro is an anti freeze device for use
with the Topaz trough valve. It is manually
operated and gives a constant small water flow
to assist in freeze prevention. Simply replace
the Topaz Top Nut with this screw in device
& turn it on. Allows a flow of about 4-5
gallons per hour to prevent line AND valve freezing.
Can be turned off with a slight turn for warmer
conditions.
Click
here to view the “Technical Info Sheets"
|
 |
Connect
Break Feed Coupling
The Connect Break Feed Coupling is for use with
Jobe Valves which incorporate the Detach Valve
Seal access system. The Valve can be removed
from the trough and the Connect Coupling clicks
in its place to hook up a 3/4" Extension
hose.
Click
here to view the “Technical Info Sheets"
|
 |
Reservoir
Valves
This is a range of float operated valves made
for filling large and small water reservoirs.
Jobe Reservoir Valves have 1" inlet and
are available in 3 models which give 4 in, 12
in or 24 inch water level differential. Reduces
pump wear by allowing water levels to drop the
specified distance before opening to re-fill.
3/4" & 1" inlet with 4" differential
1" Inlet with 12" differential
1" Inlet with 24" differential
Click
here to view the “Technical Info Sheets"
|
 |
Water
Level Indicator
If you're looking to have a visual of the level
in your tank at a glance from up to a mile away
- this is the ticket ! Installed through the
top of the tank, this manual indicator gives
an indication of where the top of the water
level is. The rods installed are 6 feet - with
3 foot extnesions available for deeper tank
coverage. A true necessity for any water tank
!
Click
here to view the “Technical Info Sheets"
|
  |
Protect-A-Mount
Cover
This Durable, Robust UV protected cover installs
easily - with no tools ! Holds and protects
your Rojo or Topaz Valve. Great protection from
cattle, deer, horses, and other animals. Mounts
valves in accordance with USDA grade A regulations
by providing an air gap from valve to water.
Ideal for pasture or yard installation. This
is a must have to impress the milk inspector
!
Click
here to view the “Technical Info Sheets"
|
  |
Plasson Quick Connects
Plasson Quick Couplers allow you to hook up to a full flow line as quickly and easily as opening a door. When the male riser is pushed into the female it snaps into place and opens the line for full flow. A simpe squeeze on the snap arm of the rise releases the connection and automatically closes the line. The Female end is highly visible, with a hinged bright yellow cover to keep out dirt when not in use. Using on underground lines is common - simply add an 8" PVC pipe at the joint with a cover for access. 3/4" NPT. |
 |
Bulkhead Fitting & Adapter
A Specialized Tank fitting that allows a large hole opening to be converted to a threaded opening of either 1" - or add the 3/4" adapter to reduce further. Comes with inside and outer seals to prevent leaking. A Jobe valve can be inserted directly into the threaded fitting - reducing the amount of plumbing required. |
 |
Topaz Reservior Valve
This unique full flow valve has some features added - for better control in tank filling ! The weighted float flows down the string and meets the weight at the bottom. The two weights together activate the valve allowing the tank to begin filling. The float moves up the tring - reaching the adjustable stopper on the line - lifting both weights. This causes the valve to shut off. This unique system give the ability to adjust the start and stop points in the tank - from 2 inches to 10 feet ! (comes with a 12 foot string). The Topaz offers full flow - up to 90 gallons per minute ! Rated for water pressure from 5 up to 150 psi. 3/4" to 1.25" thread. Long Thread & backing nut come standard for reaching through tank walls. A real saver on pump wear and electrical usage !
|
 |
Topaz Part Fill Valve
Another great idea from Jobe Valves ! A high flow valve for keeping rain water storage tanks full when rainwater is short supply. the weighted float works on a string. When it reaches the bottom weight, it activates the valve to start filling the tank. The float will rise approx 6 inches releasing the pull on the arm - allowing the water pressure to close the valve. If rainwater (or other supply) refills the tank - the float rises up on the string. The small weight at the bottom holds teh string taught for next use. An overflow below the valve can allow for an air gap if local regulations require. Still the high flow (up to 90 gpm) of a Topaz Valve - but make use of the rainwater when possible ! Operating range 5-150 psi. Available in 1/2", 3/4", 1", and 1.25" threads (NPT). Long thread & back nut standard.
|
 |
Rojo Part Fill Valve
The Perfect Rainwater Accessory! This Jobe Rojo Valve can be installed in a water storage tank, above the air gap/overflow drain. the Rojo has a reduced flow - perfect for stringent local regulations on water usage ! Maximum flow at 150 psi is only about 6 gpm ! This unique design lets the valve open when the float reaches the end of the adjustable string (come with a 12 ft string), allowing the valve to begin filling. Once the float rises about 6 inches - the valve will stop - allowing for rainwater to fill the tank. Since the operating range on this little guy is 0-150, it can be used in conjunction with flow restrictors. Avaialble in 1/2" and 3/4" with a long threaded tail & back nut for reaching through tank walls.
|
 |
.
|
|